|
2023-24 & 2024-25 |
|||||
|
S. No. |
Name of the student |
Title of the paper |
Name of the Symposium attended |
Organized by |
Date/s of the event |
|
1. |
P. Purna chandrarao |
CAR PARKING MANAGEMENT CONTROLLED BY PLC SOFTWARE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
2. |
K. Sasi kumar |
CAR PARKING MANAGEMENT CONTROLLED BY PLC SOFTWARE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
3. |
SK. Sadhik |
CAR PARKING MANAGEMENT CONTROLLED BY PLC SOFTWARE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
4. |
Pavan kumar |
CAR PARKING MANAGEMENT CONTROLLED BY PLC SOFTWARE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
5. |
Naveen kumar |
CAR PARKING MANAGEMENT CONTROLLED BY PLC SOFTWARE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
6. |
D. Gopi krishna |
DESIGN AND ANALSYS OF CAR BUMPER BY USING FINITE ELEMENT ANALSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
7. |
P.Sai Kiran Yadav |
DESIGN AND ANALSYS OF CAR BUMPER BY USING FINITE ELEMENT ANALSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
8. |
B. Sai Ganesh |
DESIGN AND ANALSYS OF CAR BUMPER BY USING FINITE ELEMENT ANALSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
9. |
SK .Mabusubani |
DESIGN AND ANALSYS OF CAR BUMPER BY USING FINITE ELEMENT ANALSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
10. |
D.Venkata Pradeep |
DESIGN AND ANALSYS OF CAR BUMPER BY USING FINITE ELEMENT ANALSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
11. |
G .H.K. Ganesh |
DESIGN AND ANALSYS OF CAR BUMPER BY USING FINITE ELEMENT ANALSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
12. |
N. Meghanadh |
ARDUINO BASED THIRD EYE FOR BLIND PEOPLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
13. |
B. Yudandhar |
ARDUINO BASED THIRD EYE FOR BLIND PEOPLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
14. |
B. Pradeep Kumar |
DESIGN AND 3D PRINTING OF WALKING GEAR MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
15. |
R. Yashwanth |
DESIGN AND 3D PRINTING OF WALKING GEAR MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
16. |
B. Nithin |
DESIGN AND 3D PRINTING OF WALKING GEAR MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
17. |
V.Karthik |
DESIGN AND 3D PRINTING OF WALKING GEAR MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
18. |
P.Bala Guravaiah |
DESIGN AND 3D PRINTING OF WALKING GEAR MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
19. |
Syed Sardar Vali |
IOT BASED VEHICLE ACCIDENT ALERTING SYSTEM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
20. |
Nelavalli Vikas |
IOT BASED VEHICLE ACCIDENT ALERTING SYSTEM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
21. |
Chatta Venkatramaiah |
IOT BASED VEHICLE ACCIDENT ALERTING SYSTEM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
22. |
Ramavathu Pavan Kumar Naik |
IOT BASED VEHICLE ACCIDENT ALERTING SYSTEM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
23. |
Mannepalli Veera Narasimha |
IOT BASED VEHICLE ACCIDENT ALERTING SYSTEM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
24. |
P.Krishna Chaithanya |
DESIGN AND FABRICATION OF FOLDABLE MOBILITY SCOOTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
25. |
D.Veeranji reddy |
DESIGN AND FABRICATION OF FOLDABLE MOBILITY SCOOTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
26. |
E.Mohan Sai |
DESIGN AND FABRICATION OF FOLDABLE MOBILITY SCOOTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
27. |
G.Sai Pavan |
DESIGN AND FABRICATION OF FOLDABLE MOBILITY SCOOTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
28. |
A. Sai Srinivas |
DESIGN AND FABRICATION OF FOLDABLE MOBILITY SCOOTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
29. |
J. Prasad |
DESIGN AND ANALYSIS OF MARINE PROPELLER SHAFT BY USING FINITE ELEMENT ANALYSIS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
30. |
M. Naga Thirumala Rao |
DESIGN AND ANALYSIS OF MARINE PROPELLER SHAFT BY USING FINITE ELEMENT ANALYSIS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
31. |
Morapakula Charan Teja |
DESIGN AND FABRICATION OF DEXTERITY OF A HUMAN HAND BY USING 3D PRINTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
32. |
Shaik Adil |
DESIGN AND FABRICATION OF DEXTERITY OF A HUMAN HAND BY USING 3D PRINTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
33. |
Munikola Santhosh Kumar |
DESIGN AND FABRICATION OF DEXTERITY OF A HUMAN HAND BY USING 3D PRINTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
34. |
Bandi Srinivas |
DESIGN AND FABRICATION OF DEXTERITY OF A HUMAN HAND BY USING 3D PRINTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
35. |
Kuppala Srinu |
DESIGN AND FABRICATION OF DEXTERITY OF A HUMAN HAND BY USING 3D PRINTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
36. |
Shaik Guttikonda Salikm |
DESIGN AND FABRICATION OF DEXTERITY OF A HUMAN HAND BY USING 3D PRINTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
37. |
N.Yaswanth |
FABRICATION OF STAMPING MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
38. |
CH. Sai Nithin |
FABRICATION OF STAMPING MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
39. |
G.Siva Ganesh |
FABRICATION OF STAMPING MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
40. |
P.Pavan Kumar |
FABRICATION OF STAMPING MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
41. |
SK.Taheer |
FABRICATION OF STAMPING MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
42. |
K. Gopi |
DEVELOPING OF MATERIAL SEGREGATION SYSTEM BY USING PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
43. |
K. Dhanujay Reddy |
DEVELOPING OF MATERIAL SEGREGATION SYSTEM BY USING PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
44. |
P. Srikanth |
DEVELOPING OF MATERIAL SEGREGATION SYSTEM BY USING PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
45. |
Sk. Nagurvali |
DEVELOPING OF MATERIAL SEGREGATION SYSTEM BY USING PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
46. |
B. Bala Siva Yogendra Nandu |
DESIGN AND FABRICATION OF MULTI MODE ROBOTIC CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
47. |
M. Ajay |
DESIGN AND FABRICATION OF MULTI MODE ROBOTIC CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
48. |
O. Venkata Ravindra |
DESIGN AND FABRICATION OF MULTI MODE ROBOTIC CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
49. |
G. Sunny |
DESIGN AND FABRICATION OF MULTI MODE ROBOTIC CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
50. |
M. Prakash |
DESIGN AND FABRICATION OF MULTI MODE ROBOTIC CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
51. |
P.D.Bharath Chandan |
DEFECT DETECTION ON WELDED JOINTS USING ULTRASONIC TESTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
52. |
B. Rajesh |
DEFECT DETECTION ON WELDED JOINTS USING ULTRASONIC TESTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
53. |
B. Hemanth Kumar |
DEFECT DETECTION ON WELDED JOINTS USING ULTRASONIC TESTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
54. |
A. Adithya |
DEFECT DETECTION ON WELDED JOINTS USING ULTRASONIC TESTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
55. |
M. Sasi Pavan |
DEFECT DETECTION ON WELDED JOINTS USING ULTRASONIC TESTING |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
56. |
Sk. Parvez |
ANALYSIS OF ULTRASONIC TESTING ON HOT ROLLED MILD STEEL PLATE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
57. |
N. Rakesh |
ANALYSIS OF ULTRASONIC TESTING ON HOT ROLLED MILD STEEL PLATE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
58. |
D. Pardhu Ganesh |
ANALYSIS OF ULTRASONIC TESTING ON HOT ROLLED MILD STEEL PLATE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
59. |
R. Baddu Naik |
ANALYSIS OF ULTRASONIC TESTING ON HOT ROLLED MILD STEEL PLATE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
60. |
V. Ganesh |
ANALYSIS OF ULTRASONIC TESTING ON HOT ROLLED MILD STEEL PLATE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
61. |
M.Sashank |
DESIGN AND FABRICATION OF LINEACTUATOR BY USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
62. |
Abhiram chowdary |
DESIGN AND FABRICATION OF LINEACTUATOR BY USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
63. |
M.J.Vinay Kumar |
DESIGN AND FABRICATION OF LINEACTUATOR BY USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
64. |
D.Raviteja |
DESIGN AND FABRICATION OF LINEACTUATOR BY USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
65. |
J.Prakash |
DESIGN AND FABRICATION OF LINEACTUATOR BY USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
66. |
B.Mohan |
WI-FI CONTROLLED CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
67. |
T.Vamsi Ganesh |
WI-FI CONTROLLED CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
68. |
K.Gowri Sankara rao |
WI-FI CONTROLLED CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
69. |
B.K.Pavan Kumar |
WI-FI CONTROLLED CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
70. |
B.Syam babu |
WI-FI CONTROLLED CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
71. |
G. Sundara Samrajya Sugnan |
COMPARATIVE STUDY OF S1223RTL AIRFOILS WITH NACA0012 AIRFOIL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
72. |
Ch. Gopi |
COMPARATIVE STUDY OF S1223RTL AIRFOILS WITH NACA0012 AIRFOIL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
73. |
G. Ayyappa Reddy |
COMPARATIVE STUDY OF S1223RTL AIRFOILS WITH NACA0012 AIRFOIL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
74. |
Sk. Jakir |
COMPARATIVE STUDY OF S1223RTL AIRFOILS WITH NACA0012 AIRFOIL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
75. |
B. Narendra Reddy |
COMPARATIVE STUDY OF S1223RTL AIRFOILS WITH NACA0012 AIRFOIL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
76. |
A.Ramarao |
DESIGN AND FABRICATION OF AUTOMATIC PNEUMATIC CLUTCH AND BRAKING SYSTEM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
77. |
A. Gopi Raju |
AUTOMATIC COLOUR CODE SENSING PUNCHING MACHINE CONTROLLED BY PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
78. |
P. Chandu Harsha Vardhan |
AUTOMATIC COLOUR CODE SENSING PUNCHING MACHINE CONTROLLED BY PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
79. |
Sambasiva Rao |
AUTOMATIC COLOUR CODE SENSING PUNCHING MACHINE CONTROLLED BY PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
80. |
John Hosanna |
AUTOMATIC COLOUR CODE SENSING PUNCHING MACHINE CONTROLLED BY PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
81. |
Sk. Lal Ahamad Basha |
AUTOMATIC COLOUR CODE SENSING PUNCHING MACHINE CONTROLLED BY PLC |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
82. |
B.Demudu Babu |
ANALYSIS OF WING LOCATION ON AERODYNAMICS PERFORMANCE OF AIRPLANE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
83. |
D.Chandu |
ANALYSIS OF WING LOCATION ON AERODYNAMICS PERFORMANCE OF AIRPLANE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
84. |
R.Sai |
ANALYSIS OF WING LOCATION ON AERODYNAMICS PERFORMANCE OF AIRPLANE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
85. |
B.Ramanjaneyulu |
ANALYSIS OF WING LOCATION ON AERODYNAMICS PERFORMANCE OF AIRPLANE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
86. |
S.Ranendra Vamshi |
ANALYSIS OF WING LOCATION ON AERODYNAMICS PERFORMANCE OF AIRPLANE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
87. |
V. Manikanta |
AUTOMATIC HVAC SYSTEM SCREEN DEVELOPMENT USING SCADA |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
88. |
SK. Manisha |
AUTOMATIC HVAC SYSTEM SCREEN DEVELOPMENT USING SCADA |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
89. |
N. Naveen |
DESIGN AND FABRICATION OF 3D PRINTED PLANE TURBINE MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
90. |
G. Sandeep |
DESIGN AND FABRICATION OF 3D PRINTED PLANE TURBINE MECHANISM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
91. |
K.Maheswar |
LEAKAGE DETECTION BY USING PLC IN OIL AND GAS INDUSTRIES |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
92. |
G.Koteswararao |
LEAKAGE DETECTION BY USING PLC IN OIL AND GAS INDUSTRIES |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
93. |
M.Rama Krishna |
LEAKAGE DETECTION BY USING PLC IN OIL AND GAS INDUSTRIES |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
94. |
B.Pavan Kumar |
LEAKAGE DETECTION BY USING PLC IN OIL AND GAS INDUSTRIES |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
95. |
SK.G.Abdul |
LEAKAGE DETECTION BY USING PLC IN OIL AND GAS INDUSTRIES |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K24 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
19-04-2024 & 20-04-2024 |
|
96. |
G. Hashwanth Praveen Reddy |
FABRICATION OF FATIGUE SPECIMENBY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
97. |
S. Narendra Babu |
FABRICATION OF FATIGUE SPECIMENBY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
98. |
V. Yashwanth Sai |
FABRICATION OF FATIGUE SPECIMENBY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
99. |
SK.MD. Riyaz |
FABRICATION OF FATIGUE SPECIMENBY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
100. |
G. Vamsi |
FABRICATION OF FATIGUE SPECIMENBY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
101. |
R. Anil |
FATIGUE CHARACTERIZATION OF A356-SiC METAL MATRIX NANO COMPOSITES BY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
102. |
T.Radha krishna |
FATIGUE CHARACTERIZATION OF A356-SiC METAL MATRIX NANO COMPOSITES BY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
103. |
V. Yoganjaneyulu |
FATIGUE CHARACTERIZATION OF A356-SiC METAL MATRIX NANO COMPOSITES BY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
104. |
P.Kalyan |
FATIGUE CHARACTERIZATION OF A356-SiC METAL MATRIX NANO COMPOSITES BY USING STIR CASTING METHOD |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
105. |
K.Prudhvi Yashwanth Reddy |
SMART AUDITOURIUM USING ARDUNIO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
106. |
V.Avinash |
SMART AUDITOURIUM USING ARDUNIO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
107. |
B.Jagadeesh |
SMART AUDITOURIUM USING ARDUNIO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
108. |
B.Rambabu |
SMART AUDITOURIUM USING ARDUNIO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
109. |
P.Hussian |
SMART AUDITOURIUM USING ARDUNIO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
110. |
J.Madhu |
SMART AUDITOURIUM USING ARDUNIO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
111. |
P. Gopinadh |
FIRE AND GAS SAFETY ALARM PROTOTYPE USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
112. |
D.Santhosh |
FIRE AND GAS SAFETY ALARM PROTOTYPE USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
113. |
O.Veeranjaneyulu |
FIRE AND GAS SAFETY ALARM PROTOTYPE USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
114. |
S. Manikumar |
FIRE AND GAS SAFETY ALARM PROTOTYPE USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
115. |
L. Rajasekhar |
FIRE AND GAS SAFETY ALARM PROTOTYPE USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
116. |
D.Veeranji Reddy |
DEVELOPING FACE RECOGNITION SYSTEM USING AI & ML |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
117. |
P.Sai Kiran Yadav |
DUAL AXIS SOLAR TRACKING SYSTEM |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
118. |
K. Lakshmi Vara Prasad |
DESIGN AND FABRICATION OF ELECTRIC VEHICLE CHASSIS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
119. |
T. Siva Reddy |
DESIGN AND FABRICATION OF ELECTRIC VEHICLE CHASSIS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
120. |
Shaik Sameer |
DESIGN AND FABRICATION OF ELECTRIC VEHICLE CHASSIS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
121. |
M. Jesudasu |
DESIGN AND FABRICATION OF ELECTRIC VEHICLE CHASSIS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
122. |
A. Nagendra Babu |
DESIGN AND FABRICATION OF ELECTRIC VEHICLE CHASSIS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
123. |
M.S Willims |
DESIGN AND SIMULATION OF GYRO SPHERE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
124. |
M.Naga Lakshmaiah |
DESIGN AND SIMULATION OF GYRO SPHERE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
125. |
I.Prathap Reddy |
DESIGN AND SIMULATION OF GYRO SPHERE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
126. |
R.Satish Kumar |
DESIGN AND SIMULATION OF GYRO SPHERE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
127. |
SK.Subhani |
DESIGN AND SIMULATION OF GYRO SPHERE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
128. |
CH. Ashok |
DESIGN AND ANALYSIS OF CONNECTING ROD USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
129. |
B.Prasanna Babu |
DESIGN AND ANALYSIS OF CONNECTING ROD USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
130. |
J.Sandleya |
DESIGN AND ANALYSIS OF CONNECTING ROD USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
131. |
B.Vishnu Vardhan Reddy |
DESIGN AND ANALYSIS OF CONNECTING ROD USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
132. |
V.Hemanth Kumar |
DESIGN AND ANALYSIS OF CONNECTING ROD USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
133. |
G. Gopi Chand |
DESIGN AND FABRICATION OF STEERING GEAR MECHANISM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
134. |
M. Raja Sekhar |
DESIGN AND FABRICATION OF STEERING GEAR MECHANISM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
135. |
A. Yugandhar |
DESIGN AND FABRICATION OF STEERING GEAR MECHANISM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
136. |
K. Pradeep |
DESIGN AND FABRICATION OF STEERING GEAR MECHANISM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
137. |
N. Bala Naveen |
DESIGN AND FABRICATION OF STEERING GEAR MECHANISM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
138. |
N.Rakesh |
DESIGN & FABRICATION OF SUSPENSIONSYSTEM FOR AN ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
139. |
I.Ratnam raju |
DESIGN & FABRICATION OF SUSPENSIONSYSTEM FOR AN ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
140. |
M.Ajay kumar |
DESIGN & FABRICATION OF SUSPENSIONSYSTEM FOR AN ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
141. |
SK.Ameer |
DESIGN & FABRICATION OF SUSPENSIONSYSTEM FOR AN ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
142. |
Ch.Sriram |
DESIGN & FABRICATION OF SUSPENSIONSYSTEM FOR AN ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
143. |
SK.Dastagiri |
DESIGN & FABRICATION OF BRAKING SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
144. |
Y.Rajesh |
DESIGN & FABRICATION OF BRAKING SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
145. |
P.Rajesh |
DESIGN & FABRICATION OF BRAKING SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
146. |
SK.Mastan Vali |
DESIGN & FABRICATION OF BRAKING SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
147. |
K.Akash |
DESIGN & FABRICATION OF BRAKING SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
148. |
R. Sivanjaneyulu |
FABRICATION AND ANALYSIS OF TRANSMISSION SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
149. |
E. Ashok |
FABRICATION AND ANALYSIS OF TRANSMISSION SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
150. |
G. Venkata Bhaskar |
FABRICATION AND ANALYSIS OF TRANSMISSION SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
151. |
R. Surya Prakash |
FABRICATION AND ANALYSIS OF TRANSMISSION SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
152. |
Y. Rakesh |
FABRICATION AND ANALYSIS OF TRANSMISSION SYSTEM FOR ELECTRIC VEHICLE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
153. |
K.ParameswaraRao |
THE EFFECT OF TITANIUM OXIDE (TiO2) NANO LUBRICANT ON THEPERFORMANCE OF SINGLE CYLINDER DIESEL ENGINE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
154. |
P.Ameer Khan |
THE EFFECT OF TITANIUM OXIDE (TiO2) NANO LUBRICANT ON THEPERFORMANCE OF SINGLE CYLINDER DIESEL ENGINE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
155. |
Sk.Jilani |
THE EFFECT OF TITANIUM OXIDE (TiO2) NANO LUBRICANT ON THEPERFORMANCE OF SINGLE CYLINDER DIESEL ENGINE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
156. |
Ch.Lakshmi Sumanth |
THE EFFECT OF TITANIUM OXIDE (TiO2) NANO LUBRICANT ON THEPERFORMANCE OF SINGLE CYLINDER DIESEL ENGINE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
157. |
G. Chandra Sekhar |
THE EFFECT OF TITANIUM OXIDE (TiO2) NANO LUBRICANT ON THEPERFORMANCE OF SINGLE CYLINDER DIESEL ENGINE |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
158. |
U.Shanmukha rao |
DESIGN AND THERMAL ANALYSIS OFENGINE FINS USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
159. |
K.Johny |
DESIGN AND THERMAL ANALYSIS OFENGINE FINS USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
160. |
D.Mahesh Reddy |
DESIGN AND THERMAL ANALYSIS OFENGINE FINS USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
161. |
K.Bhanu prasad |
DESIGN AND THERMAL ANALYSIS OFENGINE FINS USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
162. |
I.Nagul meeravali |
DESIGN AND THERMAL ANALYSIS OFENGINE FINS USING ANSYS |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
163. |
K.Nikhil Kumar |
DESIGN AND FABRICATION OF 3D ENGINEMODEL USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
164. |
K.Venkata krishna |
DESIGN AND FABRICATION OF 3D ENGINEMODEL USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
165. |
G.Harikrishna Reddy |
DESIGN AND FABRICATION OF 3D ENGINEMODEL USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
166. |
M.Baji Vali |
DESIGN AND FABRICATION OF 3D ENGINEMODEL USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
167. |
V.Ayyappa |
DESIGN AND FABRICATION OF 3D ENGINEMODEL USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
168. |
D.Anil |
3D PRINING OF AUTOMOTIVE DIFFERENTIAL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
169. |
G.Nagaiah |
3D PRINING OF AUTOMOTIVE DIFFERENTIAL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
170. |
SK.N.Althaf hussain |
3D PRINING OF AUTOMOTIVE DIFFERENTIAL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
171. |
R.kishore |
3D PRINING OF AUTOMOTIVE DIFFERENTIAL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
172. |
L.Gopi reddy |
3D PRINING OF AUTOMOTIVE DIFFERENTIAL |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
173. |
SK. Mahammad Bilal |
DESIGN AND FABRICATION OF MIG 29-k FIGHTER JET USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
174. |
K.Nagendra Babu |
DESIGN AND FABRICATION OF MIG 29-k FIGHTER JET USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
175. |
G.Ravi |
DESIGN AND FABRICATION OF MIG 29-k FIGHTER JET USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
176. |
N.Anwar Basha |
DESIGN AND FABRICATION OF MIG 29-k FIGHTER JET USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
177. |
B.Prasanna Kumar |
DESIGN AND FABRICATION OF MIG 29-k FIGHTER JET USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
178. |
P. Naveen |
DESIGN AND FABRICATION OF CAM AND FOLLOWER USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
179. |
D. Hema Gurunadh |
DESIGN AND FABRICATION OF CAM AND FOLLOWER USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
180. |
M. Vamsi |
DESIGN AND FABRICATION OF CAM AND FOLLOWER USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
181. |
P. Ganesh |
DESIGN AND FABRICATION OF CAM AND FOLLOWER USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
182. |
K. Ashok |
DESIGN AND FABRICATION OF CAM AND FOLLOWER USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
183. |
K. Sai Raghu Vamsi |
DESIGN AND FABRICATION OF CAM AND FOLLOWER USING 3D PRINTER |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
184. |
J.Nagendra babu |
FABRICATION OF HUMAN FOLLOWING ROBOT USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
185. |
M. Rakesh |
FABRICATION OF HUMAN FOLLOWING ROBOT USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
186. |
A. Raghu Rami Reddy |
FABRICATION OF HUMAN FOLLOWING ROBOT USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
187. |
T. Vinay kumar |
FABRICATION OF HUMAN FOLLOWING ROBOT USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
188. |
J. Jayanth kumar |
FABRICATION OF HUMAN FOLLOWING ROBOT USING ARDUINO |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
189. |
G. Anil, K. Naveen |
FABRICATION OF HAND CONTROLLED ROBOT CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
190. |
Ch. Karunakar |
FABRICATION OF HAND CONTROLLED ROBOT CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
191. |
K. Ajith Kumar |
FABRICATION OF HAND CONTROLLED ROBOT CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
|
192. |
V. Koteswara Rao |
FABRICATION OF HAND CONTROLLED ROBOT CAR |
International conference on Emerging Trends in Mechanical Engineering and Industrial Automation- 2K23 |
Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. |
09-06-2023 & 10-06-2023 |
2022-23 |
|||||
|---|---|---|---|---|---|
| S. No. | Name of the student | Title of the paper | Name of the Symposium attended | Organized by | Date/s of the event |
| 1. | Y.VENKATA REDDY | Camera Based Color Identification Robot For Segregation | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 2. | K.PRAVEEN REDDY | Camera Based Color Identification Robot For Segregation | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 3. | K B M Murthy | PLC based water level indicator & Controlling system |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 4. | M V S Kishore Kumar | PLC based water level indicator & Controlling system |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 5. | Shaik Shabber | PLC based water level indicator & Controlling system |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 6. | Sreeramulu | Design Of Automatic Colour Code Sorting Machine Based On Pneumatics And PLC | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 7. | Sagar Yanda | Design Of Automatic Colour Code Sorting Machine Based On Pneumatics And PLC | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 8. | Srihari | Design Of Automatic Colour Code Sorting Machine Based On Pneumatics And PLC | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 9. | Raghuveer | Design Of Automatic Colour Code Sorting Machine Based On Pneumatics And PLC | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 10. | Konda Babu | Design And Fabrication Of Inversions Of Slider Crank Mechanism By Using 3d Printing | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 11. | Shaik Fayaz | Design And Fabrication Of Inversions Of Slider Crank Mechanism By Using 3d Printing | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 12. | Kondu Naveen Reddy | Design And Fabrication Of Inversions Of Slider Crank Mechanism By Using 3d Printing | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 13. | Y.Siva Reddy | Manipulation Of Robotic Arm By Using QR Code | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 14. | B.Gopi | Manipulation Of Robotic Arm By Using QR Code | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 15. | Vaka.Venkata Tarun | Design And Fabrication Of App Controlled Robot | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 16. | K. G N D V Prasanth | Design And Fabrication Of App Controlled Robot | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 17. | D Raviteja | Wi-fi controlled ward Sanitization robot car |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 18. | Ch.V.L.Janardhan | Wi-fi controlled ward Sanitization robot car |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 19. | V.Yuvaraj | Design And Fabrication Of 3d Printed Swivelling Vice | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 20. | B.Vinod | Design And Fabrication Of 3d Printed Swivelling Vice | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 21. | M Venakta Sai Rajesh | Modelling And Fabrication Of Finger Flywheel Engine Using 3d Printing | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 22. | P. Pedda raju | Design And Fabrication Of Prosthetic Hybrid Hand By Using 3d Printing Technique | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 23. | K Ravi Varma | Design And Fabrication Of Geneva Mechanism Using 3d Printing | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 24. | A Suneel Babu | Design And Fabrication Of Industrial Time Controller | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 25. | G Anand Babu | Design And Fabrication Of Industrial Time Controller | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 26. | N Pedda Gopi | Design And Fabrication Of Industrial Time Controller | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 27. | K. Maria Arun Kumar | Design And Analysis Of Helical Coil Spring In Two Wheeler Suspension System | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 28. | E.Ramu | Design And Analysis Of Helical Coil Spring In Two Wheeler Suspension System | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 29. | M. Shabran Baig | Designing and modelling of Go-kart vehicle |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 30. | P. Prem Kumar | Designing and modelling of Go-kart vehicle |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 31. | P.Sudarsan Babu | Designing and modelling of Go-kart vehicle |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 32. | Alladi Naresh | Effect of titanium oxide NANO lubricant on the Performance of VCR system |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 33. | J.Dinesh Kumar Reddy | Effect of titanium oxide NANO lubricant on the Performance of VCR system |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 34. | P.Koteswararao | Effect of aluminium oxide nano lubricant On the performance of VCR system |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
| 35. | N.Mallikarjuna | Effect of aluminium oxide nano lubricant On the performance of VCR system |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 29/07/2022 & 30/07/2022 |
2021-22 |
|||||
|---|---|---|---|---|---|
| 1 |
B.Chandra Bose |
3d printing of prototype through image processing using autodesk recap photo software | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation- 2K21 | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 30/07/2021 & 31/07/2021 |
| 2 | P.Mokthar Bhasha |
Design and analytics of differential gear box |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation- 2K21 | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 30/07/2021 & 31/07/2021 |
| 3 | Tellamekala Anitha | Establishment of SCR Test facility and Evaluation of 8mm pitch Honeycomb Type Catalyst in a 20 Litre capacity SCR Test facility | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation- 2K21 | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 30/07/2021 & 31/07/2021 |
| 4 | K.Murali Krishna Prasad | Study of performance and emission characteristics in direct-injection compression-ignition engine fuelled with pond water algae biodiesel | International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation- 2K21 | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 30/07/2021 & 31/07/2021 |
| 5 | P. Manoj Kumar |
CFD Analysis of Super Utiliy Vehicle to Determine Aerodynamic Behaviour |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation- 2K21 | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 30/07/2021 & 31/07/2021 |
| 6 | N. Gopi |
CFD Analysis of Two Pass Double Pipe Heat Exchanger with TiO2/Ethylene Glycol Nano Fluid |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation- 2K21 | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 30/07/2021 & 31/07/2021 |
| 7 | D. Samson |
A Study and Synthesis of 8 Bar one Degree of Freedom Walking Mechanism |
International Conference on “Emerging Trends In Mechanical Engineering And Industrial Automation- 2K21 | Department of Mechanical Engineering, Narasaraopeta Engineering College, Narasaraopet, A.P, India. | 30/07/2021 & 31/07/2021 |
